Below you'll find a list of all posts that have been categorized as “2016-2017 Wrist Exoskeleton”
We have talked with Dolan and finished all the paperworks about 3D-printing. Currently, they are 3D-printing, we would get the product this weekend. After that , we will combine all the pieces together and it will take around 1 hour. The project is off the track a little bit, but we think we will have something to show in the …
We are currently talking to Dolan about the right material and cost for our projects. We expect to get the final parts in next week. For last week, we adjusted some feature that should be in the final device. We adjusted some hole to the right. We increase the diameter of the broken parts. And then we scale it to …
The first hand mold was bad, so we made another one. The shipping process slow things down. However, the result is quite satisfying to us. The goal for next week will be finishing 3D scanning. We contacted Dolan about 3D Scanning about this. I’m sure it will be done before the Mid Review. We expected the final model should be …
We are currently in the process of adjusting the Solidwork files. It is expected to be finished this weekend and next week we will send out the files to be 3D-printed. Most of the bars are already done. If we can finish the 3D printing next week. On week 9, we will go to home depot and put all the …
We are currently in the process of adjusting the Solidwork files. It is expected to be finished this weekend and next week we will send out the files to be 3D-printed
We already scanned the hand mold and have the Solidworks file. Currently, we are preparing for the slides that we will represent in the Peer Review next week.
One good news is we finished the hand mold and already tested the strength of our linkages and bars. Aluminum turned out is a really good material for this project. We will finish the 3D scanning in week 5 and hopefully the main parts in week 6.
The molding package has arrived. We did finish the order from machine shop at Physical Science Building. Fortunately, the order has been finished and we will go pick it up on Monday. We will finish the hand molding on next Tuesday of week 4 and the 3D Scanning on week 4. The bars and linkages, after a group meeting, will …
We just received the molding package. The hand molding will be finished this weekend and be used for 3D Scanning in the Ayala Library. We spoke to Terry Wang this afternoon, it turned out that there is a few things we need to do, such as the specific timeline for this quarter (what is the task and deadline for each …
This week, our group had two meetings to discuss about what have done and what will be done in this quarter. We contacted the machine shop to process our parts. In addition, we needed to do a 3D Scanning of a real hand to stimulate the whole system. Some molding materials are needed and already purchased; we will finish a …
